| Tolerance Table – diconfa GmbH | ||||
|---|---|---|---|---|
|
Cutting tolerances DIN 7715 Part 5: Rubber mats, rubber runners, construction protection mats, foam, silicone, rubber strips, soft PVC |
||||
| Nominal size range | Class | |||
| from (mm) | to incl. (mm) | P1 | P2 | P3 |
| 0 | 1,6 | ±0,2 mm | ±0,2 mm | ±0,4 mm |
| 1,6 | 4 | ±0,2 mm | ±0,3 mm | ±0,4 mm |
| 4 | 6,3 | ±0,2 mm | ±0,4 mm | ±0,5 mm |
| 6,3 | 10 | ±0,3 mm | ±0,5 mm | ±0,6 mm |
| 10 | 25 | ±0,3 mm | ±0,6 mm | ±0,8 mm |
| 25 | 40 | ±0,4 mm | ±0,8 mm | ±1,0 mm |
| 40 | 63 | ±0,5 mm | ±1,0 mm | ±1,5 mm |
| 63 | 100 | ±0,6 mm | ±1,2 mm | ±2,0 mm |
| 100 | 160 | ±0,8 mm | ±1,4 mm | ±2,5 mm |
| 160 | 250 | ±1,0 mm | ±1,6 mm | ±3,0 mm |
| 250 | 400 | ±1,6 mm | ±2,5 mm | ±5,0 mm |
| 400 | – | ±0,5% | ±0,8% | ±1,5% |
|
Important notes: • These values apply to length and width, not to material thickness. • Soft PVC cut parts: Class P2 • Ring rubber mat: minimum tolerance: ±20 mm • Drawing parts and drawer inserts: Class P2 • For the length and width dimensions of all other materials, Class P3 applies. • For the length dimension of rubber mats, construction protection mats and rubber strips, only the positive tolerance applies. Double values apply (instead of ±1,5% → +3%). |
||||
| Rubber mats, rubber strips, construction protection mats, rubber runners, foam | ||||
| Material thickness tolerance: ±10%, minimum 0,2 mm | ||||
| Plastic sheets | |||
|---|---|---|---|
| Soft PVC sheets | |||
| from (mm) | to (mm) | Lower tolerance | Upper tolerance |
| 1 | 3,5 | −0,1 mm | +0,1 mm |
| 4 | 6,5 | −0,3 mm | +0,1 mm |
| 7 | 10 | −0,4 mm | +0,1 mm |
| 12 | – | −0,5 mm | +0,1 mm |
| Plastic rods and tubes | |||
|---|---|---|---|
|
Length tolerance: ±3 mm This tolerance applies to all types of plastic rods and tubes. |
|||
| Solid material – round rods: PTFE | |||
| from (mm) | to (mm) | Lower tolerance | Upper tolerance |
| 4 | 50 | 0 | +0,5 mm |
| 50 | – | 0 | +1,0 mm |
| PVC round rods (diameter tolerances) | |||
| Diameter (mm) | Lower tolerance | Upper tolerance | |
| Plastic tubes | ||
|---|---|---|
| Acrylic tube – outer diameter tolerances | ||
| Range | Tolerance | |
| from Ø 5 mm to 160 mm | ±1,5% | |
| from Ø 160 mm to 300 mm | ±2,0% | |
| from Ø 310 mm to 500 mm | ±2,5% | |
| Acrylic tube – inner diameter tolerances | ||
| Range | Tolerance | |
| from Ø 5 mm to 160 mm | ±1,5% | |
| from Ø 160 mm to 300 mm | ±2,5% | |
| from Ø 310 mm to 500 mm | ±3,5% | |
| Wall thickness – inner diameter tolerances | ||
| Range | Tolerance | |
| from Ø 5 mm to 64 mm | ±5% | |
| from Ø 70 mm to 100 mm | ±8% | |
| from Ø 110 mm to 200 mm | ±10% | |
| from Ø 210 mm to 300 mm | ±15% | |
| from Ø 310 mm to 500 mm | ±20% | |