diconfa EPDM cellular rubber foam sheet approx. DIN A4 – self-adhesive

Info zu diesem Artikel PREMIUM QUALITÄT: Zellkautschuk EPDM wie Moosgummi - selbstklebend gitterverstärkt und stark haftend - MADE IN GERMANY - geschlossenzellig, 100% wasserdicht, stark komprimierbar hohe Rückstellkräfte LIEFERUNG: Zellkautschuk EPDM Schaumstoffplatte SELBSTKLEBEND ca. DIN A4 - 200x300x1mm - MENGE: 1 Stück - Materialstärke und Menge nach Kundenwunsch anpassen - 1 bis 50mm - 1 bis 200 Stück MATERIALEIGENSCHAFTEN: wetterfest (UV-stabil, witterungsbeständig), sehr gut zu verkleben, keine Lösemittel, geruchslos, gleicht Unebenheiten aus, abriebfest, sehr gute Materialverträglichkeit VERKLEBEN: Untergrund muss trocken, staub- und fettfrei sein. Universell verklebbar u.a. auf Holz, Metall, Kunststoff, Beton, Stein, lackierte Oberflächen, Gummi, etc. Schutzfolie vor dem Verkleben entfernen. EINSATZBEISPIELE: Heimwerken, Modellbau, Basteln, Auto KFZ, Garage, Haus und Garten, Maschinen- und Anlagenbau, Heizung und Sanitär, Messebau, Baustelle, Logistik, Handwerk, Abdichtung, etc. Mehr anzeigen

100% QUALITY: The SBR rubber strip is weather-resistant, durable, flexible, and versatile. The narrow rubber mats are smooth on both sides, easy to bond, and manufactured in Germany. FUNCTIONS: The diconfa rubber profiles can be used in industry, logistics, commercial, and private applications (e.g., as underlay, padding, decoupling, insulation, soundproofing, damping, seals, etc.). ADDITIONAL PRODUCTS: Rubber strips are available from "diconfa – digital configuration factory" in widths from 8 mm to 1200 mm and lengths up to 10 m, as well as self-adhesive options and other materials (EPDM, NBR, etc.). TOLERANCES: The strips have a thickness tolerance of +/- 10%, but at least +/- 0.2 mm; width tolerance is +/- 1.5%, and length tolerance is +2%. CUSTOM CUTTING: The strips can be cut with a sharp utility knife. For straight cuts, we recommend using a template or guide rail. ADHESION: The material can be bonded to almost any surface using a suitable adhesive. Ensure the surface is clean. RUBBER ODOR / VENTILATION: Rubber has the typical rubber smell you may know from new car tires. This will dissipate over time. For indoor use, only prolonged airing outdoors (laid flat, frost-free, and protected from sunlight) can help reduce the odor. If you are sensitive to smells, we recommend using EPDM material for indoor use, as its odor is significantly reduced. TECHNICAL APPLICATION: The SBR rubber strips are designed for simple technical applications without high requirements regarding chemical resistance, temperature, etc. SKIN CONTACT: The material is not intended or suitable for applications involving direct contact with human skin. INSTRUCTION SHEET: An instruction sheet for handling the delivered rubber strips is included with the delivery.

CONSTRUCTION PROTECTION MAT made of rubber granulate: Permeable mat made of robust rubber, slip-resistant and safe to walk on. UV-resistant, flame-retardant, weather- and temperature-resistant from -40 °C to +120 °C. In addition, durable, rot-proof and highly resilient – ideal for versatile applications. INDOOR USE: Low-odor rubber underlay for sound and vibration damping. Perfect as decoupling for fitness equipment, speakers, washing machines, dryers, refrigerators, or other household appliances. LOGISTICS & INDUSTRY: Can be used as a slip-resistant anti-slip mat for load securing, pallets, trailers, or loading areas. Protects sensitive surfaces, ensures a secure grip, and serves as a reliable transport protection mat in car trunks, containers, or mesh boxes. OUTDOOR USE: Versatile use as a construction protection and separating layer on flat roofs, balconies, terraces, or under photovoltaic systems (e.g. balcony power plants). Also suitable as a fall protection mat, underlay for pools, floor protection in garden sheds, or on play areas.

100% QUALITY: The self-adhesive SBR rubber strip is weatherproof, durable, flexible, and versatile in use. The narrow rubber mats are smooth on both sides, feature a high-quality self-adhesive surface on one side, and are manufactured in Germany. FUNCTIONS: The self-adhesive diconfa rubber profiles can be used in industry, logistics, commercial applications, and private settings (e.g., as padding, underlay, decoupling, insulation, soundproofing, damping, seals, etc.). Thanks to the self-adhesive backing, they are especially easy to fix in place. ADDITIONAL PRODUCTS: At "diconfa – digital configuration factory," rubber strips are available in widths from 8 mm to 1200 mm and lengths of up to 10 m, including self-adhesive versions and variants made from other materials (EPDM, NBR, etc.). TOLERANCES: The strips have a thickness tolerance of +/- 10%, but at least +/- 0.2 mm. The width tolerance is +/- 1.5%, and the length tolerance is +2%. CUSTOM CUTTING: The self-adhesive strips can be individually cut using a sharp utility knife. For straight cuts, we recommend using a template or guide rail. ADHESION: Thanks to the pre-applied self-adhesive layer, the strips can be applied directly to clean, smooth surfaces — without any additional adhesive. RUBBER ODOR / VENTILATION: Rubber has a characteristic odor, similar to that of new car tires. This will dissipate over time. For indoor use, we recommend allowing the product to air out outdoors for an extended period (lay flat, store frost-free and protected from sunlight). For odor-sensitive individuals, EPDM is a suitable alternative material as it has a significantly milder smell. TECHNICAL APPLICATION: The self-adhesive SBR rubber strips are designed for simple technical applications without high requirements for media resistance, temperature, etc. SKIN CONTACT: The material is not intended for applications involving direct contact with human skin. INFORMATION SHEET: An information sheet on how to handle the delivered self-adhesive rubber strips is included with your order.

DICONFA BUILDING PROTECTION MAT 10 MM: Robust rubber underlay for roof, balcony and equipment. The building protection mat 10 mm protects surfaces, dampens vibrations and provides secure grip – durable, weather-resistant and flexible for many applications both indoors and outdoors.FEATURES & MATERIAL: Made from recycled rubber granulate, this mat combines elasticity with high compressive strength. The surface is non-slip and UV-resistant, allowing water to drain laterally. 10 mm thickness offers an ideal mix of protection and flexibility. The building protection mat 10 mm can be neatly cut with a cutter and adapts to uneven surfaces.VERSATILE APPLICATIONS: Ideal as a protective layer on flat roofs, under terrace supports, on balconies, in workshops and garages, or as a machine and washing machine underlay. It decouples, reduces noise and protects seals. Suitable for indoor and outdoor use, also under plant pots, sports equipment or shelves, without leaving marks.TEMPERATURE RESISTANCE & DURABILITY: The mat remains dimensionally stable from -40°C to +120°C and withstands UV radiation, frost, moisture and oils. The rot-proof material distributes loads evenly and reduces point loads. This way, you can permanently extend the lifespan of your coverings and seals – even with intensive outdoor use.INSTALLATION & MAINTENANCE: Installation is quick: clean the substrate, lay dry or fix punctually with PU adhesive if necessary. Cut joints for drainage and leave edge distances. For maintenance, water with mild cleaner is sufficient. The building protection mat 10 mm is solvent-resistant and remains functional even after frequent cleaning.

DICONFA BUILDING PROTECTION MAT 8 MM: The building protection mat 8 mm made from recycled rubber granulate reliably protects surfaces, dampens vibrations and provides slip-resistant grip – ideal for terraces, balconies, flat roofs and machinery.FEATURES & MATERIAL: Made from durable, recycled rubber granulate, the 8 mm thick mat offers optimal pressure distribution and vibration damping. The textured surface is slip-resistant, UV-resistant and water-repellent. 8 mm is the ideal compromise between flexibility and protection: easy to cut, yet robust enough for point loads, equipment feet and slab supports. Additionally, it is flame-retardant and rot-proof.VERSATILE APPLICATIONS: Whether on roof terraces and balconies under pedestal supports, as a base for air conditioning units, heat pumps and compressors, or indoors under washing machines, racks and fitness equipment – the building protection mat 8 mm protects coverings, reduces structure-borne noise and compensates for minor unevenness. It also ensures a secure stand in workshops and garages and protects the substrate.TEMPERATURE RESISTANCE & DURABILITY: The mat remains dimensionally stable from -40°C to +120°C and withstands sun, rain and frost without becoming brittle. The UV-stable material prevents premature ageing, and the edges do not fray when cut. Cleaning is easy with water and mild detergent; avoid solvents. This way, the surface and damping properties retain their performance permanently.